Distributed Antenna Systems (DAS) play a vital role in enhancing wireless coverage in complex environments like airports, stadiums, hospitals, and office buildings. While active equipment such as base stations and repeaters often receive the most attention, passive components—such as power splitters, directional couplers, loads, tappers, and hybrid combiners—are essential for signal distribution and optimization within DAS infrastructure.
Their design and performance directly influence system efficiency, PIM (Passive Intermodulation) behavior, and long-term reliability.
When evaluating or selecting passive RF components for DAS, engineers must consider multiple performance parameters beyond just insertion loss. These include:
Low PIM Levels (e.g., < –150 dBc):
Critical for high-capacity systems, particularly those supporting LTE and 5G NR. Poor PIM performance can lead to intermodulation distortion that degrades signal quality.
Broad Frequency Range (e.g., 698–2700 MHz / 698–3800 MHz):
Ensures compatibility with multi-band and multi-operator systems, avoiding the need for multiple component sets.
VSWR and Return Loss:
Poor impedance matching can cause signal reflection, leading to reduced efficiency and increased power loss.
Power Handling Capability:
Components must support both uplink and downlink power levels, especially in high-gain DAS topologies.
Power splitters divide input signals into multiple outputs with equal or specific ratios. For optimal performance:
Use low insertion loss designs to reduce signal degradation.
Ensure phase balance across outputs to maintain signal integrity.
Choose products with robust mechanical design and N-type or 4.3-10 connectors to ensure low PIM.
Directional couplers are used to tap off small amounts of signal for monitoring or feedback purposes.
To improve performance:
Select units with tight coupling accuracy and excellent directivity.
Ensure broadband support for DAS systems operating across wide frequency bands.
Used to terminate unused ports without reflection:
Choose high-power, low-VSWR loads to safely dissipate RF energy.
Always confirm connector compatibility and thermal reliability.
Even the highest-spec passive component can underperform if improperly installed. Key practices include:
Avoid tight bends or improper cable grounding that introduce unwanted reflections.
Maintain consistent torque across all connectors to prevent PIM spikes.
Keep all passive components clean and dry; contaminants can severely affect PIM.
With the increasing deployment of 5G DAS, passive components must now accommodate frequencies up to 3.8 GHz and support Massive MIMO or beamforming-compatible architecture.
Look for:
Ultra-wideband combiners and hybrid couplers
Low-profile, panel-mount components for space-constrained indoor applications
Modular PIM testable units that allow on-site verification
Tags :
Você tem alguma dúvida ?
Ligue-Nos : +86 551 65329702
